Master in Mechanical Engineering for Product Innovation at University of Padua

Detailed entry requirements

Mechanical Engineering for Product Innovation has open admission for applicants meeting its academic, qualification and language requirements. The latest foreign-qualification listing is for 2027/28. The separate 2026/27 School of Engineering call for Italian qualifications is labelled below. Sources were reviewed on 6 October 2026.

Eligible degree and required subject preparation

A bachelor’s degree, or equivalent, preferably in mechanical engineering, mechatronics engineering, aerospace engineering or industrial engineering. Other engineering backgrounds can be considered if they cover the listed technical subjects. [1]

For other engineering backgrounds, the listing identifies mathematics and physics foundations, structural and functional mechanical design, mechanics of materials, thermodynamics, industrial plants and turbomachinery. Evaluation considers GPA, transcript and CV. A degree in engineering without this preparation is not automatically eligible. [1]

The university checks academic preparation alongside recognition of the qualification and country-specific grade conditions. We provide your transcript and the required application documents, and any requested course descriptions. The numerical Italian-sector requirements below apply to the separately published Italian-degree route. [1, 2, 3, 7, 9]

How academic suitability is assessed

The listing describes GPA, transcript and CV evaluation and does not prescribe a universal written test or interview duration. [1]

We use your transcript and CV to show the required academic preparation. Where an interview is requested, the invitation sets out the instructions. A positive academic assessment and completion of the other entry requirements are needed before final enrolment. [1, 7]

Foreign qualifications: recognition and country-specific grades

A relevant degree and the programme’s subject preparation are required together with recognition of the qualification. The Admissions and Welcome Unit decides whether your foreign award permits entry to this master’s programme. Its country table is reference guidance rather than an exhaustive list: applicants whose country is absent may still apply. The university evaluates the qualification, its level, length and grade; meeting a listed minimum does not itself constitute an admission offer. [2, 3]

Examples below use the Master’s degree column of the table updated on 15 September 2026 for 2027/28. They are requirements for the education system that awarded your qualification, rather than a single percentage applying to every applicant. [3]

• India: a three- or four-year Honours bachelor’s degree; a four-, five- or five-and-a-half-year professional bachelor’s degree; or a three-year Pass/General bachelor’s degree plus a postgraduate bachelor’s degree or at least a one-year master’s degree. The listed minimums are 70/100, 7.0/10, 5.6/8 or 2.8/4, according to the grading scale. [3]
• Pakistan: accepted routes include a two-year Bachelor (Pass) plus a two-year master’s degree; a two-year Bachelor (Pass) plus an LL.B.; a Bachelor (Pass) plus Bachelor of Education route of three years in total; a three-year Honours bachelor’s degree; or a four- or five-year professional bachelor’s degree. Minimum GPA: 3.3/4. [3]
• Bangladesh: a four-year Honours bachelor’s degree or a four- or five-year professional bachelor’s degree, with minimum GPA 3.3/4. [3]
• Iran: a four- or five-year bachelor’s degree, or a two-year associate degree followed by a two-year discontinuous bachelor’s degree, with minimum GPA 15/20. [3]
• China: a bachelor’s degree certificate following a four-year undergraduate programme together with the graduation certificate and the specified CSSD verifications. The listed minimums are 75/100, 3.0/5 or 2.8/4. [3]
• Nigeria: at least a four-year bachelor’s degree, or a two-year Higher National Diploma plus the last two years of a bachelor’s degree, with minimum GPA 3.5/5. [3]
• Egypt: a four- or five-year BA, BSc or Licence, with minimum GPA 75/100 or 3.0/4. Other countries and qualification combinations are assessed under their own table entries and university recognition procedures. [2, 3]

English B2: accepted certificates and exemptions for foreign-degree applicants

The programme is taught in English and requires at least CEFR B2. For applicants using a foreign qualification, the current central policy allows the language certificate to be supplied after the application, but no later than 31 July 2027 for completion of enrolment. Certificates must be valid under the issuing body’s rules; where there is no expiry date, they must have been obtained within the two years preceding the opening of selection on 15 September 2026. [1, 4]

The current official B2 certificate list gives the following scores and qualifications. Higher-level certificates must meet the university’s corresponding C1 threshold where that level is relied upon. [5]

• IELTS Academic or General Training: 6.0. The university includes IELTS Home based tests and accepts one-skill retakes. [5]
• TOEFL iBT or Home Edition: 86 for tests taken up to 20 January 2026, or 4.5 on the new scale for tests taken from 21 January 2026. MyBest scores are accepted. [5]
• Cambridge B2 First: 173; Trinity ISE II; Oxford Test of English: 126; PTE Academic: 65; Pearson International Certificate: Level 3 Upper Intermediate; Duolingo English Test: 115. [5]
• Also listed: Gatehouse GA Level 1 ESOL International Classic B2; British Council Aptis ESOL General or Advanced with overall CEFR B2; and LanguageCert ESOL or Academic B2 Communicator covering four skills. Remote or online versions are accepted where the official list specifies them. [5]
• A certificate exemption applies to native English speakers from the university’s specified countries: Antigua and Barbuda, Australia, Bahamas, Barbados, Belize, Canada, Dominica, Grenada, Guyana, Ireland, Jamaica, Malta, New Zealand, St Kitts and Nevis, St Lucia, St Vincent and the Grenadines, Trinidad and Tobago, United Kingdom and United States. [6]
• An entirely English-medium entry or higher qualification can support exemption if the awarding institution is in one of those listed countries, an EU country or a Schengen country. An English-medium degree from any country is not a blanket exemption under this foreign-qualification policy. [6]
• The list also exempts specified entry qualifications completed entirely in English: IBDP, European Baccalaureate, GCE or IGCE, and a High School Diploma accompanied by three US Advanced Placements with scores from 3 to 5. We supply evidence for the exact exemption claimed. An Italian language certificate is not required when applying to this English-taught programme. [6, 7]

Application documents and pending graduation

The application needs colour scans in PDF format: an English CV, an English motivation letter, your academic transcript, your qualifying degree award, a passport or an eligible identity document, and language evidence when required. Applicants who have not yet graduated may use an official enrolment or provisional certificate at application stage. For the 2027/28 foreign-qualification route, the study cycle must be completed by 31 July 2027; an official completion certificate may evidence that completion while the final diploma is being issued. [2, 7]

English or Italian translations of the transcript and degree documents are added when necessary. No legalised documents are required at initial application stage. A residence permit is also required for non-EU applicants residing in Italy. We include any further programme-specific documents requested in your application checklist. The public listing does not establish a universal requirement for two recommendation letters or a fixed interview duration. [1, 7]

We use one applicant account and submit every required field and attachment. The central guidance permits applications to up to two programmes; the course listing allows only one application to the same programme in an academic year. The non-refundable application fee is €60. Initial administrative checks are followed by an Academic Committee evaluation, so satisfying minimum requirements still requires a positive assessment. [1, 7]

Application calls: foreign qualifications, 2027/28

• Call One: 15 September to 15 November 2026, closing at the listing’s stated 23:59:59 Central European Time. Studies are listed to begin on 1 October 2027. [1]
• Call Two: 1 December 2026 to 1 March 2027. [1]
• Call Three: 1 April to 1 June 2027, only for EU applicants and non-EU applicants residing in Italy in an eligible category. We select the correct portal category for you. Only one application to this programme is allowed in an academic year. [1, 7]

After an offer: acceptance and final enrolment

Accept an offered place by the deadline in the offer and pay the listed non-refundable €208 acceptance/enrolment amount. Final enrolment requires the original qualifying degree and transcript, translated into Italian or English and authenticated through the applicable procedure. The transcript should identify examinations, grades and, where possible, credits and the course syllabus. CIMEA comparability may be requested if the Admissions and Welcome Unit needs further qualification verification. [1, 7, 8]

Authentication normally uses legalisation or an apostille; the university also describes CIMEA Verification as an alternative and lists treaty-based exceptions. These are final-enrolment requirements, distinct from the initial application. Non-EU students residing abroad additionally complete Universitaly pre-enrolment and the study-visa process. We follow the intake-specific instructions and offer deadlines. The standing enrolment webpage contains older cycle references, so its unqualified calendar dates are not presented here as confirmed 2027/28 deadlines. [8]

Separate route: a qualifying degree obtained in Italy, 2026/27

The School of Engineering call is expressly reserved for qualifications obtained in Italy and refers foreign-degree holders to international procedures. Annex 1 states this course’s curricular route below. The commission checks sector allocations and older qualification systems where relevant. [9]

The separate 2026/27 Italian-degree call requires language evidence with the curricular-assessment application. Graduates or prospective graduates of first-level programmes in Padua’s School of Engineering need no additional documentation because their language requirement has already been checked. Other applicants can use an accepted certificate dated from 1 January 2021, specified native-speaker citizenship, an entirely English-taught degree supported by official evidence, a qualifying Italian university language-centre certificate/open badge, or Padua’s reserved TAL B2 reading-and-listening test. A recorded ordinary university English exam is listed only for courses requiring B1 and does not by itself satisfy these B2 routes. These rules belong to the Italian-degree call and do not apply automatically to the current foreign-qualification route. [9]

• An Italian degree in L-7 Civil and Environmental Engineering, L-8 Information Engineering or L-9 Industrial Engineering, together with at least 33 CFU in ING-IND/08-17 and at least 12 CFU in ING-IND/21,22,31,32,35 and CHIM/07. The call states both the degree-class condition and these credit minimums. [9]
• The qualifying degree mark must be at least 84/110 or equivalent, and English at least B2 for the English-taught curriculum. These conditions accompany the programme’s curricular requirements. [9]
• Pre-enrol through Uniweb by 29 January 2027 at noon, submit the requirements-assessment application by 29 January 2027 at 15:00 and obtain the qualifying degree by that date. Enrolment closes on 15 February 2027. The pre-enrolment fee is €30; transfers and course changes have earlier deadlines. These are 2026/27 Italian-degree dates, separate from the 2027/28 international listing. [9]

Sources and verification

1. University of Padua, Apply Unipd: Mechanical Engineering for Product Innovation, 2027/28 intake; reviewed 6 October 2026.
2. University of Padua, Specific entry requirements for qualifications awarded by non-Italian education systems, current 2027/28 guidance; reviewed 6 October 2026.
3. University of Padua, Specific entry requirements for qualifications awarded by non-Italian education systems, updated 15 September 2026, valid for 2027/28, Master’s degree column.
4. University of Padua, Language requirement for admission to degree programmes, 2027/28 foreign-qualification guidance; reviewed 6 October 2026.
5. University of Padua, English language certifications, currently linked official list; reviewed 6 October 2026. Publication date is not printed in the document.
6. University of Padua, Exemptions: English language certification, currently linked official list; reviewed 6 October 2026. Publication date is not printed in the document.
7. University of Padua, Study in English: How to apply, standing application guidance; reviewed 6 October 2026.
8. University of Padua, Study in English: How to enrol, standing enrolment guidance; reviewed 6 October 2026.
9. University of Padua, School of Engineering open-access master’s programmes, 2026/27 call reserved for holders of qualifications obtained in Italy, Annexes 1 and 2 and deadline summary.

What must another engineering background cover?

Mathematics and physics foundations, structural and functional mechanical design, mechanics of materials, thermodynamics, industrial plants and turbomachinery. The university evaluates your GPA, transcript and CV as well as qualification recognition and English B2.

What minimum grade applies?

Foreign qualifications follow the current country-specific degree and GPA rules and this programme’s academic assessment. The separate 2026/27 Italian-degree call requires at least 84/110 or equivalent, the stated curricular preparation and English B2.

What English evidence is accepted?

English B2. Current foreign-qualification examples include IELTS 6.0, PTE Academic 65 and Duolingo 115. TOEFL requires 86 on the old scale or 4.5 from 21 January 2026. We match your certificate to the official list or document an accepted exemption.

Can I apply before my degree is awarded?

The foreign-qualification route accepts an official enrolment or provisional certificate at application stage. For 2027/28, you must complete your qualifying study cycle by 31 July 2027. The 2026/27 Italian-degree route has separate deadlines.

When can I apply internationally?

For 2027/28: 15 September to 15 November 2026, or 1 December 2026 to 1 March 2027. The 1 April to 1 June 2027 call is reserved for EU applicants and eligible non-EU residents in Italy. Only one application to this programme is allowed per academic year.

Which application documents are required?

An English CV and motivation letter, your transcript, your qualifying degree or an official provisional or enrolment certificate if pending, a passport or eligible ID, the required language evidence and any additional checklist documents. We prepare colour PDF scans and any necessary English or Italian translations.

Can someone handle my whole application to Mechanical Engineering for Product Innovation at Padua?

Yes. ApplyAZ, an Italy-based consultancy that works only with public universities, checks your transcript against Padua's rules for this programme, handles the application and Universitaly pre-enrolment, helps you file the University of Padua DSU scholarship application at the right time and in the right format, and prepares your visa file, for eligible students. Start by checking your eligibility.

I'm applying from India. What is the route into Mechanical Engineering for Product Innovation?

You need a bachelor's degree, preferably in mechanical, mechatronics, aerospace or industrial engineering. Other engineering degrees can be considered if they cover the listed technical subjects [1]. For India, the university lists Honours, professional or Pass-plus-further-study bachelor's routes, with minimums such as 70/100 or 7.0/10 [3]. The steps are an Apply Unipd application, an Academic Committee evaluation and Universitaly pre-enrolment. Indian students apply for the type D study visa at the Italian embassy or consulate that covers their state, such as New Delhi, Mumbai or Bengaluru.

Is the route different from Pakistan, Bangladesh or Sri Lanka?

No. The academic rules for Mechanical Engineering for Product Innovation are the same whatever your nationality. Applicants from Pakistan, Bangladesh and Sri Lanka follow the same steps as India: an Apply Unipd application, an Academic Committee evaluation and Universitaly pre-enrolment, then a type D study visa from the Italian mission for their country of residence. Read our guide for students in Dhaka.

I live in the UAE, Saudi Arabia, Qatar, Kuwait, Oman or Bahrain. Where do I apply for the visa?

At the Italian embassy or consulate responsible for the country where you legally live, after Universitaly pre-enrolment. The academic rules for Mechanical Engineering for Product Innovation are the same whatever your nationality, and Gulf residents follow the same steps: an Apply Unipd application, an Academic Committee evaluation and Universitaly pre-enrolment. Read our guides for Dubai, Riyadh and Doha.

I'm applying from the UK, US, Canada, Singapore or Malaysia. Is anything different?

The academic rules are identical. Non-EU applicants who live abroad, including citizens of these countries, follow the same route: an Apply Unipd application, an Academic Committee evaluation and Universitaly pre-enrolment, then a type D study visa. Read our guides for London, New York, Singapore and Kuala Lumpur.